Downloads:Demonstration GUIs

From Guiliani

Revision as of 06:32, 29 May 2020 by Sascha (talk | contribs)

Guiliani Technical Showcase (GuilianiDemo) (NEW!)

GuilianiDemo 2.3 Screen.png

GSE Project

This package includes all neccassary project files to open GuilianiDemo within GSE. There are several resolutions included (800x480 480x272 240x320)

Download GuilianiDemo 2.3 (GSE Project)

Pre-Compiled Binaries

Windows Desktop (800x480 and 480x272)

Download GuilianiDemo for Windows Desktop (800x480 and 480x272)

Linux (arm-linux-genuebihf) (800x480)

this can be run on mostly any Linux-powered devices (e.g. Raspberry Pi, Atmel SAMA5, etc.) it is tested on:

  • i.MX6 ULL
  • i.MX7

Use can use the commandline-options to change resolution and input-devices (see --help for more information)

Download GuilianiDemo for arm-linux-gnueabihf

Renesas GR-Peach (480x272)

Download GuilianiDemo for Renesas GR-Peach

STM32F4xx (240x320)

Download GuilianiDemo for STM32F4xx

STM32F7xx (480x272)

Download GuilianiDemo for STM32F7xx

CoffeeDemo

Screenshot CoffeeDemo.png

including the following platforms:

  • Windows-Desktop
  • Renesas DisplayIt (RZ/A1H)

Windows Desktop (800x480)

Download CoffeeDemo for Windows Desktop (800x480)

Renesas DisplayIt (RZ/A1H) (800x480)

Download CoffeeDemo for Renesas DisplayIt

Notes to the various platforms

Windows-Desktop

to run the application in Windows just double-click the EXE-File in the correct folder of the package
please note: since the file was downloaded from the internet Windows 7 and later might show up a warning before it executes the application

arm-linux-gnueabi/arm-linux-gnueabihf

to run the application transfer the contents to the downloaded zip-file onto the the device, change to the folder and execute the binary.
please note:at least the following libraries need to be installed on the device:

  • freetype 2.48+
  • png 1.6
  • zlib

Renesas DisplayIt/StreamIt

to flash the binaries and the corresponding resources just execute the batch-file located in the the root-folder of the package
it will then show you a number of possible boards the application can be loaded to
please note: if a bootloader is neccessary for your board you will have to flash it before you can use the contents of the package. Also the neccessary tools needed for the flashing-process (e.g. SEGGER JLINK) need to be present in the JLINK-folder of the package (if automatic detection fails)

Renesas GR-Peach

to flash the downloaded binary just connect the GR-Peach-board via USB to PC and copy the file onto the newly added drive "MBED"
please note:if no new drive is added to the explorer you have used the wrong USB-port of the GR-Peach-board. use the one most away from the LAN-interface.

STM32F4xx/STM32F7xx

to flash the binary you will need a tool called "STM32 ST-LINK utility", which can be downloaded from STM-website

in the flashing application the following steps are to be executed:

  • connect target-board via USB-cable to PC
  • in ST-Link Utility:
    • additional step for STM32F7xx if Error-Message is shown during flashing-process: Menu "External Loader", select N25Q128_STM32F746G-DISCO and click on "Validate"**
    • click "Connect to the target"
    • click "Open file" and locate the hex-file of the application you want to flash
    • click "Program verify" and OK to flash the file

please note:at the beginning of the demo you will have to calibrate the touch-display by clicking on the the dots appearing in the corners of the display
also note:since the STM32F4XX-board is using a resistive touchscreen, you will need to use a stylus